Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 5490 Owner’s Manual

Removing display panel

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. WLAN card
    4. WWAN card (optional)
    5. display hinge cover
    6. display assembly
    7. display bezel
  3. Remove the four M2x3 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access the display cable [2].
    Figure displaying how to remove the screws that secure the display panel and how to lift to flip the display panel to access the eDP cable.
  4. To remove the display panel:
    1. Peel the conductive tape [1].
    2. Remove the adhesive strip that secures the display cable [2].
    3. Lift the latch and disconnect the display cable from the connector on the display panel [3] [4].
      Figure displaying how to peel the adhesive to access the display cable.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\